 |
| 1. Find a level spot and put down the 3 leveling jacks. |
|
Scooter Schooner |
Schooner Assembly
Instructions
|
|
| 1. Find a level spot and put down the 3 leveling jacks. |
|
|
| 2. Install the 3 bed legs into the pockets. 2 of the bed legs slide out of the rack and one is stored on top of the camper. |
|
|
| 3. Flip lid over on the bed legs and slide out the inner lid and latch the side flaps. |
|
|
| 4. Check to see that the box of the trailer and the bed are in a straight line. If leveling is needed, insert the jack handle into the holes of the jack legs to raise. (Step on the lever at the base of the jack to release and lower the jack. |
|
|
 |
|
|
 |
| 5. Pull shock-corded fiberglass tent poles out of pole bag and assemble. Lay the two tent poles across the bed and lay the tent over the poles. Snap the back corners of the tent to the trailer. Install aluminum awning poles into pockets on trailer frame. Put awning bow through sleeve at the end of the awning. |
|
|
| 6. Two people stand on each side of the tent, grasp the front pole, push it to the front and into the pockets. Do the same with the rear pole. Walk around and snap tent down and you're ready to camp. |
|
Scooter Schooner |
©2005-2007
